Main Ingredient：Methyl acrylate
Product Attributes：
·Appearance (uncured)：Red
·Fluorescent：≥Fluorescent properties LMs
·Composition：Single-component - no mixing required
·Viscosity：6.000/8.000mpa.s
·Curing Method：Anaerobic
·Re-curing：Accelerator
·Strength：High
·Temp Range：-54℃～150℃
Unique Features：
·Single component
·High temperature resistance
·High strength
Volume：50ml/250ml
Shelf Life：15 Months
Package：10PCS/MEDBOX 10MEDBOXES/CTN
"High viscosity, excellent chemical resistance. Suitable for permanent locking and sealing of threaded fasteners, anaerobic thread locking adhesive. Cures between two closely matched metal surfaces in the absence of air. Used for permanent locking and sealing of threads up to M36. Prevents thread rust and corrosion, can be disassembled with heat and tools.
Usage Method
Preparation: The surface of assembly components should be clean, ensuring no residual oil stains or grease, such as engine oil, rust inhibitor, etc.
Most substrate surfaces do not require special pre-treatment. Pre-treatment is necessary for especially difficult-to-bond substrates.
Application: Apply an appropriate amount of this product evenly on the thread surface.
Removal: Excess adhesive will not cure and can be wiped away. You can also use a dedicated cleaning agent for cleaning.
Promoter: When used in conjunction with a promoter, it can effectively shorten the curing time.
Store the product in its unopened original packaging in a cool, dry place. The ideal storage temperature for this product is within the range of 8°C to 21°C (46°F to 70°F). It is not recommended to store this product under conditions below 8°C or above 28°C (82°F).
Prevent contamination: Do not return excess adhesive to the original packaging.
Do not use this product in pure oxygen or oxygen-rich environments. It should not be used as a sealing material for chlorine gas or other strong oxidizing substances.
